CHECKING BEFORE OPENING BOX
Please check the box whether it is in good condition before opening it. If find the box is broken in transport please inform the transport company in time and keep the broken box as proof so we can claim to transport company for compensation

The packing list below:

1. 1 pc machine
2. 1 pc dmx signal cable
3. 1 pc power cable
4. 1 pc manual

PRODUCTION INTRODUCTION

This machine is our unique stage effect product, it is whole new exterior design, consummate produce technics，original technical performance, make it is in the lead position among all others of its class. With our company experience in setting off fireworks for many years and extract the strongpoint of stage effect equipment. We manufacture this more powerful, and more
Compatibility, easy operational product.

Product Specification:
Voltage: 220V             Power: 700 W
Size: 53.5 * 25.5 * 21 cm   Weight: 13 kg

Char: This machine uses small metallic confetti (1*1 cm or 0.8*0.8 cm size), with the assistance of light and power, to make effects looks like cold fountain fireworks firing, no fire, no smoke, the metallic can be used repeatedly, controlled by dmx, program its shoot time according your request.

INSTALLATION METHOD
Follow the pictures as below:

1. Please place the machine on somewhere horizontal;
2. Plug the dmx cable into dmx socket, and connect power cable with power
 source.
3. Set correct dmx address, 1 unit obtain 1 dmx channel.

ATTENTION

THE MACHINE USE AC 220V/50HZ VOLTAGE
DON’T INSTALL EQUIPMENT WITH POWER ON!

PLEASE MAKE SURE THE CONNECTION IS RELIABLE BEFORE YOU TURN ON THE POWER OF CONTROLLER!

OPERATION METHOD
Operating it as the following:
1. Please take out the “Paper storage cover”, put 0.1-0.15 kg loose confetti into the machine, then cover the machine with “paper storage cover”, make sure it is closed firmly;
2. Turn on the power of machine, dmx light flashes if dmx controller is on and dmx cable connection is well;
3. Operate the dmx controller to make the machine working.

Notice:
1. The consumable confetti must be in loose and don’t squeeze it in the paper storage box;
2. Make sure the cover is closed firmly, notice there are some screws around there, don’t put the cover on the screws;
3. The machine can’t work for long time, thus, the led lighting will flash when the working time is more than 1 min.

TROUBLESHOOTING
Simply troubleshooting solve:

1. Press control button, no fountain out, please check the control cable is connected well;

2. Turn on power, no any response, please check the power plug is connected with power source, or to check the fuse is good;

3. When find there are confetti out but no any light, please check the spot light works well.